Polaris RZR XP1000 & XP Turbo Base Walker Evans Dual Rate Spring Kits

This is a true dual-rate spring kit with adjustable crossover collars from Schmidty Racing Suspensions for the Polaris RZR XP1000 & XP1000 Turbo. Kits are available for either 2 or 4 seat models. These kits feature top of the line Swift brand springs which replace the low quality / saggy / poor riding OEM springs.

This kit will only fit Walker Evans shocks that came standard on the RZR XP1000. This kit will not work or fit Fox shocks.

Full Replacement Spring Kits Include:

• (1) Installation Instruction Sheet
• (2 or 4) Delrin Spring Separator / Slider
• (4) Threaded Locking Crossover Collar (two 2.0" front and two 2.5" rear collars)
• (8) Quality Swift Springs (4 tender & 4 main springs)
• *

Each kit does all four (4) front and rear shocks

2014 - 2016:XP1000 models come with GEN 1 Walker Evans Shocks. GEN 1 shocks have threads cut into the bodies from about halfway up the shock all the way up to the top of the shock, where the remote or piggyback reservoir connects. These models with GEN 1 shocks will use different length springs than the later year XPs with GEN 2 shocks, so be sure to choose your correct model in the drop-down.

2017 - Current:XP1000 & XP Turbo Base models come with GEN 2 Walker Evans shocks. GEN 2 shocks have threads cut into the shock bodies all the way down to the bottom where the shaft comes out of the dust cap. This kit will also fit the Base Turbo models with GEN 2 Walker Evans shocks.

Note: Models with GEN 1 shocks will use different length springs than the later year XP models with GEN 2 shocks, so be sure to choose your correct model in the drop-down. Some 2017- models (GEN 2 shocks) only have a single spring on the front shock without a tender spring and slider. If you have this configuration, choose the option with two (2) additional new front sliders in the drop-down.